Partner

Các hình thức tại Cao Minh Travel mọi thắc gọi 0938 990 369

User Rating: 4 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Inactive

Để Giữ gìn cân bằng hệ sinh thái , chế biến gỗ cao su có thể được sử dụng để sản xuất các hạng mục bên dưới.

  • Nội thất
  • Đồ dùng nhà bếp
  • Tủ quần áo
  • Sàn gỗ, ván sàn
  • Các sản phẩm tiện ích của hộ gia đình
  • Đồ chơi hoặc bất kỳ bài viết bằng gỗ khác và nhiều hơn nữa ...

hinh ung dung nganh go

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive

QUẢN ĐỐC XƯỞNG GỖ

tuyendung banner1 1

  • Mô tả công việc:

    - Quản lý nhân lực (Công nhân & Nhân viên các tổ / xưởng trực thuộc), máy móc, thiết bị, chất lượng sản phẩm và tiến độ sản xuất, giám sát các công đoạn: cưa cắt mẫu, dán cạnh phôi, khoan định vị, định hình, chà nhám, sơn lót, sơn hoàn thiện, lắp ráp, đóng gói. 
    - Nhận các thông tin liên quan đến sản xuất, tổ chức triển khai, điều hành sản xuất bảo đảm đạt năng xuất, sản lượng, chất lượng, tiến độ theo đúng kế hoạch sản xuất.
    - Tổ chức quản lý, bố trí, sắp xếp công nhân phù hợp với yêu cầu sản xuất và năng lực của công nhân.
    - Tổ chức triển khai việc theo dõi các đơn hàng sản xuất gỗ từ khi nhận các chi tiết sản xuất phôi cho đến khi thành phẩm 
    - Hướng dẫn công nhân thực hiện đúng quy trình vận hành máy móc, thiết thiết bị trong sản xuất 
    - Giám sát chất lượng, theo dõi tiến độ, theo dõi năng suất công việc.
    - Giải quyết nhanh các vấn đề, sự cố gây ảnh hưởng đến tiến độ sản xuất và chất lượng sản phẩm.
    - Quản lý, huấn luyện công nhân & nhân viên thuộc cấp gồm các Tổ Trưởng và công nhân.

  • Yêu cầu công việc:

    - Trình độ từ Trung Cấp trở lên các ngành kỹ thuật, quản lý công nghiệp, chế biến gỗ hoặc các ngành khác. 
    - Thành thạo kỹ thuật để triển khai các bản vẽ kỹ thuật chi tiết, các công đoạn sản xuất gỗ . 
    - Ít nhất 05 năm kinh nghiệm quản lý trong ngành gỗ trang trí nội thất. 
    - Tối thiểu 02 năm kinh nghiệm ở vai trò quản lý, từ Giám Sát, Phó Quản Đốc, Quản Đốc trở lên tại các xưởng sản xuất có ít nhất 100 công nhân trở lên.
    - Thành thạo các kỹ thuật sản xuất nội thất giường-tủ bếp- tủ áo- bàn –ghế,...

  • Quyền lợi được hưởng (ngoài lương):

    Chế độ BHXH và phúc lợi đầy đủ theo quy định Nhà nước
    Trao đổi thêm khi phỏng vấn

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive

banner 04

2008

Established factory specializing in producing and trading in rubber timber soaked and dried under high pressure in vacuum.

Area

10,000 Sq Mtr

Workers

150

Capacity

1000 CBM of finished products (Approx 20 Containers 40ft Per Month)

Species

Rubberwood Kiln dried

Localtion

Gia Kiem Ward, Thong Nhat Dist., Dong Nai Provine, Vietnam.

Certification

 


2010

Established factory specializing in producing and trading in rubber timber soaked and dried under high pressure in vacuum. 

Area

25,000 Sq Mtr

Workers

100

Capacity

1500 CBM of finished products (Approx 35 Containers 40ft Per Month)

Species

Rubberwood Kiln dried

Localtion

Tan Hoa Ward, Tan Chau Dist., Tay Ninh Provine, Vietnam.

Certification

 


2012

Cooperation established factory specializing in producing and trading in laminated rubber wood for Export. 

Area

5,000 Sq Mtr

Workers

80

Capacity

350 CBM of finished products (Approx 15 Containers 20ft Per Month)

Species

Rubberwood Finger Joint Laminated Panels

Localtion

An Son Hamlet, An Dien Commune, Ben Cat Town, Binh Duong Province, Vietnam

Certification

 

 

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

banner 02

Our intrinsic properties

  • Its pale blond colour blends with all colours used in interiors.
  • It looks great in its natural hues or can be stained to any other colour.
  • In structure it is like typical diffused hard wood.
  • The grain is generally straight or slightly interlocked.
  • Texture is medium coarse.
  • Pattern of wood surface at different planes combined with the characteristic grain and texture gives the timber an attractive appearance.
  • The density is comparable to that of Oak and Teak.
  • Has good binding strength.
  • Being seasoned timber, shrinkage is negligible.

The poetry of working with Soklu Wood Panel Boards

  • Soklu Wood Panel Boards are made using the technique of finger-jointing and edge gluing. Rubber wood logs are sawn to sections. Sawn sections are chemically treated and seasoned under controlled conditions of humidity and temperature.
  • These sections of shorter length are finger jointed to form long lamellas. Lamellas are edge glued to form boards of convenient sizes. This method enables production of solid wood panels, which are far superior to other panel products available today. The panels, available in standard thicknesses varying from 12mm to 40mm and are open invitation to a creative genius.

It’s a pleasure working with Soklu Wood Panel Boards…

  • Easy to saw and the sawn surface is fairly smooth.
  • Easy to machine, plain, turn and mould.
  • Excellent nail holding properties.
  • Excellent gluing characteristics and compatible to all normal industrial adhesives.
  • Excellent bonding strength.
  • Moderate wood bending properties.
  • For a 25mm thick section bending radius is approximately 500mm.
  • Bends are stable after setting.
  • Characteristic texture permits a fine smooth finish.
  • Light colour of timber permits staining in any shade.
  • Environmental friendly chemicals are used for treatment.
  • Lastly, economical in comparison to other commonly available species of timber.

Do’s and Dont’s while storing and handling Soklu Wood Panel Boards…

  • Store the panels in well ventilated godowns.
  • Place the bottom most panel in the stack over stickers of uniform thickness.
  • Cover the stacked panels with polythene/plastic sheets.
  • Transport the panels stacked horizontally. Vertical stacking can cause bending/warping.
  • Apply polish/paint on products made out of laminated panels, apply a coat of sealant even on hidden faces of the furniture, components should be sealed/polished on all faces at the same time.
  • Try and maintain the length of the cut panels more than the width. (length as measured along the grain).
  • Do not use a single panel as a door. Always support it with a frame.
  • Do not use edge laminated panels where it comes in direct contact with water, the glue used is only moderately resistant to water.

 

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive

 

banner 03

RUBBER TRAINING SERVICE
Sawing, drying wood processing is an important step in the process of wood processing. Without the technical level and modern facilities, it is difficult to have the products meet the requirements and high quality.
Batch processing: Rubberwood.vn specializes in supplying sawn timber with all specifications according to the order. Round logs are cut into standard specifications as required by each customer. The quality of sawn timber meets the standard, sawed to the right specifications, smooth-beautiful sawn ... Wood after sawing is placed on the suit of thickness, length in accordance with the regulations. It is then dried in a factory or covered area.
Drying: When the wood is finished, the drying time is increased to the thickness of the wood. Wood drying at Rubberwood.vn's factory follows a strict technical process to produce high quality products. Rubberwood.vn has a modern drying system, advanced drying technology with 13 steam dryers, including 08 semi-automatic dryers with the capacity of 30-45 m3 / oven. The dried wood is applied for each drying procedure after drying to 8-12% according to general standard of wood drying. Wood after drying is classified according to standard.

ADVISE EFFECTIVE USE OF WOOD MATERIALS IN PRODUCTION
To get the right quality wood and price, most suitable, most economical with the product you are producing, Rubberwood.vn is the right choice of customers.
Through 5 years of operation, Rubberwood.vn has the opportunity and conditions to many factories producing boards, furniture, exterior. Rubberwood.vn with a team of wood consultants has accumulated a lot of knowledge and experience in wood. Come to Rubberwood.vn, customers will be free consultation on characteristics, uses, how to preserve the wood, ... as well as help customers achieve the highest efficiency in the use of raw materials.
With the motto of Customer Satisfaction is our success with the DIFFERENT VALUES!

OTHER SERVICES
- Trading in wood materials and accessories.

 

Support Online

home support

Mr. Sang : sang@rubberwood.vn
General Director
Cell phone: +84 968 545 427
--------------------------------------------

Ms. Que : sales@rubberwood.vn
Sales Manager
Cell phone: +84 372 497 687

Online visitors

We have 46 guests and no members online